A Straight-Up Primer on Sex Dolls- Start Here

[center][/center]

[center][size=large]CLICK FOR THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Or Non-Standing Feet? The Differences Explained
You won't think about standing feet until you need them, and then you'll find the difference is gigantic. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. An irritating purchase can be evaded in one of the simplest ways: grasp the difference before you order.

Everything Follows From the Bolts
There's a straightforward basic difference. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. The doll can only sit or lie down on non-standing feet, which lack these bolts, and attempting to stand her will damage the feet. Having the bolts or not is the key, and everything else follows from that.

Standing Unaided
You need standing feet for photography and display. Standing unaided, she can be photographed in full-length poses without evident supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the primary reason most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
Also vital is standing feet for shower use. Standing is the only sensible way to shower with your doll, because lying her down in a shower is impractical and hazardous. Standing feet make her stable in a wet environment, and with the metal bolts the feet don't absorb water as non-standing feet would. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

No Precaution Is Enough
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. After that, water rusts the metal skeleton inside the leg; you won't see it for weeks or months, and it's basically unfixable once it starts. Irrespective of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower however cautious you are.

Storing Her Standing Up
There's also easier storage with standing feet in some setups. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. Display rather than hiding her away is something this suits well, and it's space-efficient for customers who don't have room for a hanging setup. Some customers prefer the apparent, accessible storage that the standing feet make possible.

What Standing Feet Cost
The downside of standing feet is that they're somewhat more expensive and a little heavier. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the cost normally ends up a few percent higher than a doll with non-standing feet. Typically worth the extra cost, and small, the difference is still worth knowing about on a really tight budget.

Not a Reason to Avoid Standing Feet
The other disadvantage is that the bolts can become noticeable if the feet are bare. Some purchasers are distracted when the bolts are visible in photos of a doll in high-heeled shoes or open-toed footwear. This is a slight aesthetic issue, and it can be solved by covering the feet with closed shoes or by opting for footwear that hides the bolts, so it's not a reason to steer clear of standing feet entirely.

Perfectly Adequate for Many Buyers
Non-standing feet are cheaper and lighter, and they're fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly adequate for a doll who largely lives in a bed or on a sofa. Entirely valid is this choice for purchasers who know what they want.

Feet That Feel Like the Rest of the Doll
Some customers find non-standing feet more comfortable to touch, being marginally softer and more adaptable. You won't generally select on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

Don't Test the Limits
It's the forgetful purchaser who trips up on non-standing feet, trying to stand the doll in any case; that's the sizable risk. It's a common mistake with genuine consequences, since the foam inside the ankle can't support the doll's weight and will tear or collapse. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. If you're buying non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

New Hardware Rarely Works as Well
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. No, not readily, is the short answer. Manufacturing is when the bolts get embedded in the soles; subsequently, you'd have to cut into the feet and install new hardware, which is costly and frequently doesn't work as well as the original. Acquire a doll with standing feet in the first place, rather than attempting to add them later, if you're considering a doll without them and think you might want them later.

Worth the Small Extra Cost
The sensible advice for buyers opting for between standing and non-standing feet is direct. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly sufficient. The safer choose when you're undecided is standing feet; they limit nothing, and the small additional cost is worth it.

A Gender Consideration
Worth mentioning, too, is a gender consideration. Broadly, standing feet upside male dolls more than female dolls, because male dolls are heavier and more tough to store in any other way. If a 45kg male doll can't stand, he has to be stored lying down, which puts pressure on the body and requires more space. With standing feet, male dolls can be stored upright, a real benefit for customers who don't have a lot of room.

Harder Soles Because of the Bolts
A final note is worth making on the aesthetic difference between standing and non-standing feet. With the doll barefoot, the somewhat harder bottom of standing feet, down to the bolts, can be evident. Some customers find this less aesthetically gratifying, especially on dolls with delicate features, because the hard soles look somewhat industrial. Softness and a natural look are what non-standing feet offer, and some purchasers prefer them. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

Bolt Care for Standing Feet
It's worth considering the maintenance angle as well. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the suitable tool. No hardware means nothing to come loose, so non-standing feet don't have this issue and are slightly lower-maintenance in the long run.

Carpet Grips Well
The bolts have an effect, too, on how the doll stands on different surfaces. Carpet is where the bolts grip well and the doll is steady. The doll may need additional support to stay upright when the bolts slip on hard flooring, especially a silky floor. Sliding is prevented on a hard surface by a small mat or a grippy pad under the feet, which you should consider. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.

How Standing Feet Change the Look
Last of all, and regularly overlooked, is how standing feet influence the doll's overall proportions. Because the bolts add a small amount of length to the foot, the doll can look somewhat different in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. With non-standing feet there are no bolts, so no such effect, and the feet are a little shorter and more natural-looking.

Pick Standing Unless You're Certain
Most purchasers should find standing feet worth the extra cost; they open up posing, display, storage, and shower choices that non-standing feet don't. That's the bottom line. Only buyers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this A No-BS Primer on Sex Dolls- What You Need to Know 2ea3c98  together with A Quick Look at Sex Dolls Right Now- Start Here bearing in mind An Honest Primer on Modern Sex Dolls- What Nobody Tells You not forgetting sites such as A Brutally Honest Look at Sex Dolls Today- What to Expect not to mention The Definitive Guide to Sex Dolls- What Actually Matters bearing in mind A Quick Guide to Sex Dolls Right Now- Read Before You Buy as well as Your Ultimate Primer on Sex Dolls- The Truth as well as The Only Deep Dive Into Sex Dolls Right Now- What Nobody Tells You bearing in mind The Ultimate Guide to Sex Dolls- No Hype Just Facts and A No-BS Look at Sex Dolls Right Now- The Real Talk. Also check out you can try these out for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]