The No-Nonsense Lowdown on Sex Dolls Today- No Hype Just Facts

[center][/center]

[center][size=large]CLICK FOR BEST SEX DOLL FEET ADVICE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
You won't think about standing feet until you need them, and then you'll find the difference is gigantic. It's a small detail on the spec sheet that changes how she stores, how she photographs, how she wears over time, and what you can do with the doll. Before you order, comprehend the difference, which is one of the simplest ways to steer clear of an annoying purchase.

Bolts or No Bolts
It's a straightforward difference, at its most basic. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you try to stand her. Present or absent, the bolts are the key, and everything else follows.

What Non-Standing Feet Can't Do
You need standing feet for photography and display. Anywhere that needs her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without visible supports. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the principal reason most photographers specify standing feet when ordering.

Showering and Standing Feet
There's shower use as well, which makes standing feet crucial. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and risky. The feet don't absorb water the way non-standing feet would, because the metal bolts ensure that, and the standing feet give her stability in a wet environment. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a genuine safety consideration.

Hidden Rust Inside the Leg
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become evident but is fundamentally unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how attentive you are, because the water will find its way in anyway of your precautions.

Standing Feet Make Storage Easier
Some setups make standing feet easier to store as well. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. Buyers who don't have room for a hanging setup will find this a space-efficient choice, and it suits purchasers who want to display the doll rather than keep her hidden. Preferred by some customers is the noticeable and accessible storage that standing feet make possible.

Is the Premium Worth Paying?
Standing feet are a little more expensive and slightly heavier, which is their disadvantage. A more involved manufacturing process plus a small quantity of weight from the metal bolts means a cost generally a few percent above a doll with non-standing feet. It's worth knowing about if you're purchasing on an extremely tight budget, though the difference is small and usually worth the extra cost.

Not a Reason to Avoid Standing Feet
There's another disadvantage: the bolts can become apparent if the feet are bare. The bolts might be visible in photos on a doll with high-heeled shoes or open-toed footwear, and some purchasers find that distracting. Because this trivial aesthetic issue can be solved by covering the feet with closed shoes or picking footwear that conceals the bolts, it's not a reason to avoid standing feet entirely.

A Doll for the Bed or Sofa
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. For a doll who'll mainly be on a bed or sofa, perfectly acceptable non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. This is an entirely valid choice for customers who know what they want.

Softer, More Flexible Feet
Some buyers find non-standing feet more comfortable to touch, being marginally softer and more adaptable. On its own this subtle difference doesn't generally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

A Doll That Can No Longer Stand
The big risk? Customers forget what kind of feet they have and try to stand the doll regardless. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this typical mistake causes real damage. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Remember that non-standing feet are non-standing, if you're buying them, and don't be tempted to test their limits.

Buy Standing Feet in the First Place
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. Not easily; that's the short answer. The bolts are embedded in the soles during manufacturing, and adding them after that needs cutting into the feet and installing new hardware, which is costly and often doesn't work as well as the original. Thinking of purchasing a doll without standing feet, but might want them later? Better to buy a doll with standing feet in the first place than to try to add them later.

Worth the Small Extra Cost
The practical advice on choosing between standing and non-standing feet is uncomplicated. You'll need standing feet for photographing the doll, displaying her standing, or utilising her in the shower. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly sufficient. If you're on the fence, go with standing feet, the safer option, because nothing is ruled out and the small extra cost is worth paying.

Pressure on the Body When Lying Down
Worth mentioning, too, is a gender consideration. Generally, standing feet upside male dolls more than female dolls, because male dolls are heavier and more tough to store in any other way. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and requires more space. Male dolls can store upright with standing feet, which is a real benefit for purchasers who don't have a lot of room.

Evident Hardness at the Bottom
There's a final note to make on the aesthetic difference between standing and non-standing feet. When the doll is barefoot, the minor hardness at the bottom of standing feet, caused by the bolts, can be apparent. Some customers find this less aesthetically gratifying, especially on dolls with fragile features, because the hard soles look marginally industrial. Softer and more natural-looking, non-standing feet are preferred by some customers. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

No Hardware to Come Loose
It's worth considering the maintenance angle as well. Standing feet aren't a fit-and-forget feature; check the bolts periodically, as a loose bolt can damage the foot or the ankle and a bolt that drops out entirely can cause the doll to collapse. By gently twisting the bolts every few months you can check them, and if they feel loose, use the appropriate tool to tighten them. There's no hardware to come loose with non-standing feet, so they don't have this issue and are marginally lower-maintenance in the long run.

Hard Flooring Can Be Slippery
Standing on distinct surfaces is also affected by the bolts. The bolts grip well on carpet, so the doll is constant. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a smooth floor. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it prevents sliding. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

Barefoot Photos and Exact Proportions
Frequently overlooked, there's a final consideration in how standing feet influence the doll's overall proportions. A little changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. Typically invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. Because they don't have the bolts, non-standing feet don't have this effect, and so are marginally shorter and more natural-looking.

Posing, Display, Storage and Shower Options
What it comes down to is that most purchasers will find standing feet worth the additional cost, since they open up posing, display, storage, and shower options that non-standing feet don't. The exception is the customer who's certain the doll will only be used in bed and won't be displayed or photographed standing. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this The No-Nonsense Breakdown of Sex Dolls Right Now- Read Before You Buy ea3c982  not forgetting sites such as The No-Nonsense Lowdown on Sex Dolls Right Now- Read Before You Buy and The No-Nonsense Look at Sex Dolls- The Stuff That Matters. Also check out here are the findings for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]