Your Ultimate Rundown of Sex Dolls- What You Need to Know

[center][/center]

[center][size=large]VIEW THE BEST SEX DOLL FEET ADVICE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
Nobody gives standing feet a thought until the day they need them, and that's when the vast difference becomes obvious. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. A frustrating purchase can be avoided in one of the simplest ways: grasp the difference before you order.

What Makes a Foot a Standing Foot
Simple is the basic difference. Standing feet have metal bolts embedded in the soles, which permit the doll to stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

A Wider Range of Poses and Settings
It's standing feet that photography and display can't do without. Standing unaided, she can be photographed in full-length poses without apparent supports, and displayed in a corner, a doorway, or any other spot that requires her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for precisely that reason.

Stability in a Wet Environment
Standing feet are essential for the shower as well. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as unsafe. In a wet environment the standing feet give her stability, while the metal bolts make sure that the feet don't absorb water the way non-standing feet would. This is a genuine safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.

No Precaution Is Enough
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes apparent, and it's essentially unfixable once it starts. Attentive or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.

Standing Feet Make Storage Easier
Storage is easier with standing feet in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Display rather than concealing her away is something this suits well, and it's space-efficient for purchasers who don't have room for a hanging setup. Standing feet make visible and accessible storage possible, which suits some purchasers best.

Metal Bolts Add Weight
A little more expensive and somewhat heavier: that's the disadvantage of standing feet. Price-wise, a doll with standing feet is generally a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. The extra cost is usually worth it and the difference is small, but an incredibly tight budget makes it worth knowing about.

A Minor Aesthetic Issue
Bare feet can make the bolts evident, which is the other downside. On a doll with high-heeled shoes or open-toed footwear, the bolts might be evident in photos, which some customers find distracting. Evading standing feet totally over this would be unnecessary; it's a trivial aesthetic issue that closed shoes, or footwear that conceals the bolts, will solve.

Non-Standing Feet: Cheaper and Lighter
For buyers who only want to use the doll in bed, with no plans to display her standing or shower with her, non-standing feet are cheaper, lighter and fine. For a doll who'll chiefly be on a bed or sofa, perfectly sufficient non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. It's a totally valid choice if you know what you want.

A Subtle Difference
Non-standing feet are a little softer and more pliable, and some purchasers find them more comfortable to touch as a result. On its own this subtle difference doesn't generally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

Trying to Stand the Doll Anyway
Forgetting what kind of feet they have, customers attempt to stand the doll anyway, and that's the big risk with non-standing feet. This is a usual slip-up, and it causes real damage, because the foam inside the ankle can't support the doll's weight and will tear or collapse. A doll that can no longer stand, even if you attempt to support her, is the result, because the feet have been permanently damaged. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.

If You Might Want Them Later
A further question is whether a doll that doesn't have standing feet can have them retrofitted. The short answer is no, not readily. Manufacturing is when the bolts get embedded in the soles; subsequently, you'd have to cut into the feet and install new hardware, which is pricey and frequently doesn't work as well as the original. If you're considering acquiring a doll without standing feet, and you think you might want them later, it's better to buy a doll with standing feet in the first place than to attempt to add them later.

The Safer Option
Picking between standing and non-standing feet? The functional advice is direct. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly enough. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small extra cost is worth it.

Why Male Dolls Need Standing Feet More
Another consideration worth mentioning concerns gender. Male dolls tend to upside more than female dolls from standing feet, as they're heavier and more difficult to store in any other way. A 45kg male doll who can't stand must be stored lying down, putting pressure on the body and needing more space. A real upside for purchasers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Softer, More Natural Non-Standing Feet
Standing and non-standing feet differ aesthetically, which is worth a final note. Marginally harder at the bottom is how standing feet are, because of the bolts, and it can be noticeable when the doll is barefoot. Hard soles look slightly industrial, which some purchasers find less aesthetically gratifying, particularly on dolls with fragile features. Some customers prefer the softer, more natural look of non-standing feet. This is a trade-off that only matters if you're photographing the doll barefoot, and it's worth factoring into your decision if barefoot photos are a priority.

Maintenance: Check the Bolts Periodically
It's worth considering the maintenance angle as well. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the suitable tool. Over the long run, non-standing feet need a little less maintenance, because they don't have hardware that can come loose.

Carpet Grips Well
The bolts influence how the doll stands on distinct surfaces as well. Carpet is where the bolts grip well and the doll is constant. Particularly if the floor is silky, the bolts can slip on hard flooring, and the doll may need extra support to stay upright. On a hard surface, consider utilising a small mat or a grippy pad under the feet to avoid sliding. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

Bolts Add a Little Length to the Foot
The doll's overall proportions are affected by standing feet, a final consideration that's often overlooked. The way the doll looks in barefoot photos can marginally change, as the bolts add a small amount of length to the foot. This subtle effect, normally invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about exact proportions. Slightly shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Who Should Skip Standing Feet
Choices for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the additional cost for most buyers. The only buyers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this The Ultimate Look at Modern Sex Dolls- The Stuff That Matters c6ff2_2  which is worth considering with An Honest Primer on Modern Sex Dolls- What to Expect and A Quick Rundown of Modern Sex Dolls- What Actually Matters. Also check out straight from the source on top of pop over to this site and you could look here for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]